Reasonable Use Frequency Of Plasma Cutting Machine in Work

Generally, after purchasing CNC Plasma Cutting machine equipment, the frequency of use of the equipment is mainly arranged according to the production order. As a result, the frequency of use of the equipment will be unstable, and sometimes it will not be turned on for several weeks, resulting in the internal components of the equipment due to moisture and other reasons. Device is damaged. Here we suggest that when the workload is not large, users may wish to power on the device regularly, run it for about 1 hour each time, and use the heat generated when the device is running to remove and reduce the humidity in the device, so as to ensure the normal use of the device.

As a kind of CNC automation equipment, the internal products such as circuit boards, trachea circuit and other products will be put on hold for a long time after being turned on, and there will be problems such as being unable to start normally due to factors such as moisture, thereby shortening the service life of the equipment.

The daily protection of plasma cutting is very important. To ensure safe production at the same time, the manufacturer of plasma pipe cutting machine will share with you the daily protection content of plasma cutting:

1. The lower part of the plasma cutting should be set with a water tank, and the cutting part should be placed under water for cutting during the cutting process to avoid smoke damage.

2. Avoid looking directly at the plasma arc during the cutting process, and wear protective glasses and face shields to avoid burns to the eyes and skin by the arc light.

3. A large amount of poisonous gas will be produced, which requires ventilation and multi-layer filtering dust masks.

4. It is necessary to wear protective equipment such as towels, gloves, foot guards, etc. to prevent the skin from being burned by the splashing sparks.

5. The high frequency and electromagnetic radiation generated by the high frequency oscillator, although the medical community and the industry are still inconclusive, but still need to do a good job of protection.