01
China Suppliers Factory Plasma Cutting Electrode with Silver Head for Enhanced Performance and Longevity
Core parameters and performance
1. Rated Current
Supports a maximum cutting current of 260A, suitable for industrial-grade cutting requirements for medium-thick plates (such as low-carbon steel, stainless steel).
2. Materials and Structure
- Imported copper base: Ensures high conductivity and heat dissipation efficiency, resistant to high-temperature oxidation, and prolongs service life.
- Hafnium (or Zirconium) wire electrodes: As the core of electron emission, have better resistance to wear than pure copper electrodes (life is increased by 3-5 times).
3. Lifespan and Stability
- Optimized cooling design (such as water-cooled structure) and high-temperature-resistant materials (such as hafnium wire), single electrode continuous working time can exceed 50 hours (requires a pressure of 0.4 MPa or above).
Defect Warning: If the hafnium wire at the center of the electrode is consumed by 2.5 - 3mm or there is an abnormal arc sound response, replace immediately.
Frequently Asked Questions (FAQ)
Q: What is the maximum rated current for this electrode?
A: The electrode supports a maximum cutting current of 260A, which is suitable for industrial-grade cutting requirements on medium-thick plates such as low-carbon steel and stainless steel.
Q: What are the benefits of using an imported copper base?
A: The imported copper base ensures high conductivity and heat dissipation efficiency. It is also resistant to high-temperature oxidation, which helps prolong the service life of the electrode.
Q: Why are Hafnium or Zirconium wire electrodes preferred over pure copper?
A: As the core of electron emission, hafnium (or zirconium) wire electrodes offer significantly better resistance to wear, increasing the overall lifespan by 3 to 5 times compared to pure copper electrodes.
Q: How long can the electrode continuously operate under optimal conditions?
A: With an optimized cooling design (such as a water-cooled structure) and high-temperature-resistant materials, the continuous working time can exceed 50 hours, provided there is a pressure of 0.4 MPa or above.
Q: When should I replace the electrode?
A: You should replace the electrode immediately if the hafnium wire at the center is consumed by 2.5 - 3mm, or if you detect an abnormal arc sound response.
What to know about this product?
SEND A MESSAGE
Something isn't Clear?
Feel free to contact me, and l will be morethan happy to answer all of your questions.